Toolboxes & Storage

These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car carrier beds. Sold as a pair.

RC Industries Aluminum Toolboxes provide superior security, convenience, and protection for whatever you want to store. Heavy Duty Aluminum Toolbox.

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by square foot. Also available in 3'x4' Sheets and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

Note: Special Handling Fees Apply for Specific Items

Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.

• 24"X24" or 24"X30"
• Pre drilled holes
• Sturdy steel angle iron
• Sold as each
  
  Available in the following sizes
  
  

  Item #	Size	Finish
  LR-2G	24" x 24"	Galvanized
  LR-5	24" x 24"	Powder Coated Black
  LR-5TG	24" X 30"	Tall Galvanized
  LR-5T	24" X 30"	Tall Powder Coated Black

Easily mount toolboxes on rollbacks or carriers. Used for underbody toolboxes on car carrier beds.

In The Ditch Trash Can Mounts are made from aluminum and can be easily mounted to any carrier or vertical surface. These mounts are made from 1/8" aluminum and they come with pre-drilled mounting holes that will fit on their Pro Series Tool Boxes for easy installation. You can choose from a mount that will hold either a 4 gallon trash can or a 6 gallon trash can. The trash can and bungee cords are not included with these mounts. Shop for a

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

• Custom built by Zip's
• Choose between the 12 & 16 Series or 10 Series Car Carrier
• Available in Galvanized or Painted finish
• Single or Dual square tubing
• Underside mount
• Subframe drilling required
• Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

RC Industries Heavy Duty Black Powder Coated Steel Toolboxes provide superior security, convenience, and protection for whatever your storage needs are. RC Toolboxes are proudly built in the Elkhart, IN for the American Working man. Each box features our pan formed door with automotive door seal ensuring that your valuables stay dry regardless of the road conditions. Our anchor compression latch is the most durable theft deterrent handle in the market, keeping tools safe.

In The Ditch's Trash Can Mounts are made from aluminum and can be easily mounted to the deck of a wrecker or any flat surface. You can choose from either a 4 gallon trash can mount or a 6 gallon trash can mount. Both are made from 1/8" thick aluminum and are easy to install with pre-drilled mounting holes. These mounts do not include a trash can or the bungee cords. Shop for your new

In the Ditch Pro Series Underbody Toolbox. The door on these boxes have a 400 lb rating so you can use it as a step. This series of boxes come with a single latch but has two internal rotary door strikers to keep the door securely closed and sealed from the weather. The In The Ditch Boxes come with pre-drilled holes just pop the plastic plug out of the pre-drilled hole to be able to us all the In The Ditch accessories.

Available in the following sizes

Item #	Size	Finish
LR-6G	20" X 24"	Galvanized
LR-6	20" X 24"	Powder Coated Black
LR-6TG	24" x 24"	Tall Galvanized
LR-6T	24" x 24"	Tall Powder Coated Black

These Rubber Clamps from Buyers Products will clamp to objects 1/2" to 2-1/2" in diameter. Clamps are made to easily adjust to different size objects. The rubber is made from heavy duty transportation grade rubber that will not be affected by the hot or cold climates. Each of these clamps will support approximately 22 lbs.

Note: Special Handling Fees Apply for Specific Items

Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.

Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes

• The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
• Works well with new Low Profile Car Carrier Beds
• Made from steel with a tuff coat black finish
• Sold as each (Not a pair)


Dimensions For Mounts:
• ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
• ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2"
Please see photos above for extra dimensions

Following Parts Sold Separately:

In In The Ditch Quick Mount Bracket - #ITD-6268
In The Ditch Mount Spacer (Only) - #ITD-6340

Zip's Gas & Garbage Can Holder Kit includes a built-in step. To be installed on the front end of an underbody toolbox. Gas Can and Garbage Can NOT included.

This Stellar (formerly American Eagle) heavy duty steel drawer system has a flat top shelf. Has a .5" or a 2.5" high riser. All drawer widths in the product line utilize our unique key locking T handle. This feature provides a one-handed operation and conceals the latch mechanism for heavy-duty protection and an attractive appearance. Drawer systems are custom-made to your specifications. Each drawer system is engineered to fit your truck s compartment and configured with the drawer sizes that will work best for you.

This Stellar (formerly American Eagle) heavy duty steel drawer system has a flat top shelf. Has a .5" or a 2.5" high riser. All drawer widths in the product line utilize our unique key locking T handle. This feature provides a one-handed operation and conceals the latch mechanism for heavy-duty protection and an attractive appearance. Drawer systems are custom-made to your specifications. Each drawer system is engineered to fit your truck s compartment and configured with the drawer sizes that will work best for you.

In The Ditch designed their XD "Extreme Duty" Trash Can Mounts to hold up to 60 lbs. of weight. Not only will these mounts hold up to 60 lbs. of weight, but they look good and will last for years. You can choose from either a 6 gallon can XD mount or 4 gallon can XD mount. These mounts are made from 1/8" thick aluminum and they have a bungee cord already installed. Both of these mounts can easily be mounted to any vertical surface such as tool boxes, truck frames, or garage walls. There is no trash can included with these mounts but we do offer those too. Shop for your new

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

This is a special toolbox mount that is used when the toolbox needs to be slid forward to miss the leaf spring mounts. Still easily mount toolboxes on rollbacks or carriers. Used for 18" X 18" toolboxes. Sold as each.

This Stellar (formerly American Eagle) heavy duty steel drawer system has a standard top shelf, 2.5" or .5" high riser. All drawer widths in the product line utilize our unique key locking T handle. This feature provides a one-handed operation and conceals the latch mechanism for heavy-duty protection and an attractive appearance. Drawer systems are custom-made to your specifications. Each drawer system is engineered to fit your truck s compartment and configured with the drawer sizes that will work best for you.

Add some flash to your Zip's Custom Toolboxes with these custom trim piece. These trim pieces will give your toolbox a custom appearance with a professional finish. These stainless steel Zip's Custom trim pieces get mounted to outside of the Zip's Custom toolbox with double sided 3M tape.

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.

Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes. The 23" rack can hold 6 regular forks and the 30" can hold 4 regular forks and 2 spring lift adapters. It fits most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted.

Easily mount (2) toolboxes side by side (1) LR-1 and (1) LR-3. Used for underbody toolboxes on car carrier beds.

The Buyers Products Stainless Steel Shovel Holder for Trucks mounts to the side of your vehicle to store a shovel or other round handled tool during travel.

Securely store your tools in this open-top, underbody toolbox. This aluminum box is constructed with a mesh bottom, allowing environmental exposures to roll off and keep your contents dry. Mounting underneath the carrier deck keeps the box secure when the bed is locked in place. Gain access to your tools, via the open top, once you've lowered the deck. Used with LR-1 mounting brackets.

The Hooklok bracket is a versatile and easy to use friction lock product providing secure mounting for a wide variety of tools and equipment. These brackets are Clamp-Action mounting brackets which use automatic clamp action force and friction to restrain tools. They can be used to mount handles and poles from 1" to 1-1/4" diameter.

Toolbox Mounting Bracket for Left Side with Integrated Reservoir Mount.

This 9" Rubber Strap from Miller Industries is used on the Wheel Lift and Tire Restraint Assembly of Century, Champion, and Holmes Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

Please Note: Product Discontinued - ALL SALES FINAL!

Toolbox Mounting Bracket for Right Side with Integrated Reservoir Mount.

In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This Bawer Black Powder-Coated Steel Tool Box comes equipped with a stainless steel single or double door with lockable stainless steel T-Handle, gas shock door openers, and a unique aerator and vent design to help keep the toolbox dry. Constructed from a single piece main structure; corrosion and chemical resistant with less welds means more strength and durability.

Accommodates various diameter tools and equipment. The powder-coated aluminum brackets feature durable, flexible draw latches to hold the tools firmly in place. For use with 1?1.3" dia. tools.

These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.

These In The Ditch Toolbox Dividers are the perfect way to organize your underbody box. They are made in several different lengths and come with pre-drilled holes so installation is a snap! Take the time to divide your box so things stay where they belong and not in one frustrating pile. Toolbox Dividers come in five different lengths so we will have one for your box. Get organized today!

This Floor Jack Tray from In The Ditch is a perfect solution for storing a Floor Jack on the deck of a wrecker or inside a Tunnel Box. This Tray has a 13" x 26" tray for the jack and a 3" x 26" Tray for the jack handle incorporated into one mount.

This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. Each hook is 6-1/2? long and has an individual load rating of 30 lbs. Need something to hang on your new storage rack? Shop our selection of

Buyers Products Black Steel Underbody Truck Box with Stainless Steel Door. Available in a variety of sizes, each professional grade box is made of strong 14 Ga steel with a 16 Ga stainless steel door. This box has a black powder coat finish and a polished stainless steel door.

This Dual Trash Can Mount from In The Ditch is an efficient way to mount two 4 gallon trash cans side by side. Shop our selection of

These powder-coated aluminum brackets feature flexible latches to secure your equipment. Brackets adjust to hold anything from 1" to 1-5/6" dia.

This Bungee Cord Holder is the easiest way to carry and store your bungees. Put 9?, 15? and 21? bungees on the holder and carry it in one hand. When you are done just hang the mount with bungees on the included mounting plate. Don?t forget to buy your bungee cords,

Tough ABS plastic construction. Holds standard 14.1-oz. propane canisters (3-1/4" base)Measures 8-3/4" x 4-1/4". Holder allows you to store your propane torch safely in the shop or on your service vehicle.

Keep your tool box organized with this Lug Wrench Bracket from In The Ditch. This pre-drilled mount easily bolts to the inside of your tunnel box and allows operators to reach lug wrenches quickly. This handy bracket holds 2 standard size lug wrenches. Shop our selection of

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by 3'x12' Rolls. Also available in 1'x1' Tiles and 3'x4' Sheets. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

These Phoenix rubber mat for toolboxes are smooth on both sides. These rubber mat measures 36",48", or 60"W x 18"D.

This Slide Out Drawer system is a perfect addition to our Pro Series Tool Box by In the Ditch. This system is a great way to get your truck organized. This slide out drawer takes just a few minutes to install using the pre-drilled holes in your Pro Series Tool Box Shelf. This drawer will take all the abuse that comes from day after day use. it is made from military grade aluminum and uses composite slide pads on the drawer. This slide out drawer has a 20 lb. load rating and will work great under tables, shelving, or just about anywhere you can think of adding a slide out drawer. This draw measures 15" wide by 13" deep by 4" tall.

This is a universal 24" cross over tunnel box for heavy duty Century and Vulcan wreckers by Miller Industries.

Ever get tired of reaching into a toolbox or under a counter to pull out a heavy object? Introducing our Heavy Duty Storage Drawers made out of military grade aluminum. These drawers are rated at 500lbs and each slide has a lock in/out position to keep from closing as your trying to place an object in the drawer. We designed this guy to mount on any flat surface with vertical adjustment for various heights. We built a drill template into the tray for ease of installation. It also includes 5 adjustable dividers which allow you to separate your items. These draw systems are offered in 19", 25", 30" and 40" setups.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Shovel or Broom mount for car carriers simply bolts to the bottom side of the subframe to store your shovel or broom. Threaded T-handle screws down to hold the tool in place. * Image shows two ZP-CBSH but these are sold individually

• Image shows two ZP-CBSH but these are sold individually
• For Dual see ZP-CBSH-10S-DUAL or ZP-CBSH-10S-DUAL-G
• LCG versions also availabe

Phoenix Adjustable ToolBox Shelf made from galvanized steel which can be installed into virtually any 18" x 18" toolbox in a matter of minutes.

This is a Zip's Custom Toolbox Sliding Drawer for an underbody toolbox. This drawer system was designed to store a jack in the toolbox. With this system putting the jack away or getting it out to use is convenient and easy. The drawer pulls out allowing you to place the jack on it instead of awkwardly trying to put it in over the toolbox door. This drawer is made from sturdy aluminum and includes mounting brackets.

Use these versatile Mini Rubber Fist Clamps from QuickFist to secure almost anything inside your truck, trailer or shop. Each clamp holds up to 25-lb. and adjusts to 5/8" to 1-3/8" dia. Attach clamps using your own #10 bolts, washers and nuts.

Keep all your chains and snatch blocks organized and easily accessible with the In The Ditch Snatchblock and HD Chain Holders. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 250 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Snatch Block and Chain Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and actually worked.

This Stellar (formerly American Eagle) heavy duty steel drawer system. With a 2.5" or .5" high riser and has drawer options. Drawer slides are rated to hold up to 500lbs and will support heavy tools and other equipment. All drawer components are manufactured of galvanized steel to prevent rust and provide a virtually indestructible surface for the latches to strike-no worn paint as on other manufacturer s product. The metal edges of the drawers, and top shelf, are hemmed for added strength and safety.

These powder-coated aluminum brackets feature flexible latches to secure your equipment. Brackets adjust to hold anything from 1" to 1-5/6" dia.

These handy shelves are not only designed to make any shop or garage more organized they just look good to. These shelves are available in 3 different widths and 5 different depths. These shelves can be mounted with a gusset down offering a smooth sleek top surface or you can turn them over for a shelf that has a lip around the top. To make your life easier we include hardware so you can mount this holder to just about anything you want. We also include special peg board screws so you can screw the holder directly to peg boards. The special screws are slightly larger than the peg board hole and work great. They can also be removed and reused so you can move or add racks without destroying your peg board. Each mount is made from Aircraft grad aluminum and come with a 100 lbs. structural load rating. Remember though, it's up to you to make sure you mount them to a surface that can support the load you put on the shelf.

This is an adjustable trash can and bucket mount from In the Ditch. It will adjust to hold any trash can or bucket from 3 gallons up to 10 gallons. Made from 1/8" thick aluminum, this mount has 5/16" mounting holes and comes with a 21" bungee cord. This will easily mount to any flat surface. Sold as 2 pieces to hold 1 can.

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

Bolt or weld brackets in place.